GEF Technologies Sdn Bhd
NO 21 , Jalan S.B. Jaya 14, Taman Industri Sungai Buloh Jaya,
47000 Sungai Buloh, Selangor Darul Ehsan, Malaysia.

Tel: +6-03-6142 2287 / 6142 2289 Fax: +6-03-6142 3288 Website: www.gef.com.my

Mobile: +6-012-238 1308 , +6-012-2011 280 , +6-012-720 2063 , +6-012-708 7010

Email: ktcheongatgef@gmail.com, nicholasatgef@gmail.com, salmiahatgef@gmail.com

   
GEF Technologies Logo
  Home | About Us | Our Services | Our Workshop & Facilities | Awards & Certificates  
Our Services > 5. Overhauling & Rewinding of DC Motor
Click on image to view in original size
i. Rewinding Of DC Motor Winding
ii. Repairing & Refurbishment Of DC Motor
iii. Overhaul Service Large DC Motor
iv. Overhaul Service DC Motor
v. Rewinding Of DC Motor
Complete Rewind 1 x 500HP , Tin Dredge Ladder Hoist 500HP DC Motor
Tin Dredge Ladder Hoist 500 HP DC Motor Complete Refurbishment   Tin Dredge Ladder Hoist 500 HP DC Motor Complete Refurbishment
Tin Dredge Ladder Hoist 500 HP DC Motor Complete Refurbishment
Steel Rolling Mill 500 HP DC Motor Armature Re-building   << Steel Rolling Mill 500 HP DC Motor Armature Re-building
 
i. Rewinding of DC Motor Winding
 
Complete Repair and Refurbishment of Large DC Motors
Complete Rebuilding of a 337 kW, DC Armature damaged V-Cone   Complete Rebuilding of a 337 kW, DC Armature damaged V-Cone
Complete Rebuilding of a 337 kW, DC Armature damaged V-Cone
Complete Re-winding and re-building of a new set of Field Coil for the 633 kW DC Motor without Removing the Inter-pole winding   << Complete Re-winding and re-building of a new set of Field Coil for the 633 kW DC Motor without Removing the Inter-pole winding.
Refurbishment of Large DC Motors at GEF Works
Repairing work on 6 no. x 1600 kW DC Motors for Cold Rolled Tandem Mill Repairing work on 6 no. x 1600 kW DC Motors for Cold Rolled Tandem Mill
Repairing work on 6 no. x 1600 kW DC Motors for Cold Rolled Tandem Mill
 
ii. Repairing & Refurbishment Of DC Motor
 
Complete Overhaul 1 x 1330 kW , 6600 Volt , 992 RPM , Primary Crusher Motor
Repairing work on 1333kW DC Motors for Cold Rolled Tandem Mill   Repairing work on 1333kW DC Motors for Cold Rolled Tandem Mill
Repairing work on 1333kW DC Motors for Cold Rolled Tandem Mill Repairing work on 1333kW DC Motors for Cold Rolled Tandem Mill
 
iii. Overhaul Service Large DC Motor
Complete Overhaul 1 x 590 kW , 384-400 Volt , 710-1420 RPM,
Cear DC Motor
Before changing new bearing   Field Coil Winding After Service, Clean & Varnish
Before changing new bearing   Field Coil Winding After Service, Clean & Varnish
DC Commutator Before Skim & Undercut DC Commutator After Skim & Undercut
DC Commutator Before Skim & Undercut DC Commutator After Skim & Undercut
DC Armature Before Service, Clean & Varnish DC Armature After Service, Clean & Varnish
DC Armature Before Service, Clean & Varnish DC Armature After Service, Clean & Varnish
Before Changing Of New Bearing-Non-Drive End ( NDE ) Side Installation Of New SKF Bearing
Before Changing Of New Bearing-Non-Drive End ( NDE ) Side Installation Of New SKF Bearing
Page 1 , Page 2 >>
Copyright © GEF Technologies Sdn Bhd. All Rights Reserved.