GEF Technologies Sdn Bhd
NO 21 , Jalan S.B. Jaya 14, Taman Industri Sungai Buloh Jaya,
47000 Sungai Buloh, Selangor Darul Ehsan, Malaysia.

Tel: +6-03-6142 2287 / 6142 2289 Fax: +6-03-6142 3288 Website: www.gef.com.my

Mobile: +6-012-238 1308 , +6-012-2011 280 , +6-012-720 2063 , +6-012-708 7010

Email: ktcheongatgef@gmail.com, nicholasatgef@gmail.com, salmiahatgef@gmail.com

   
GEF Technologies Logo
  Home | About Us | Our Services | Our Workshop & Facilities | Awards & Certificates  
Our Services > 2. Overhaul Service High Voltage Motor
Click on image to view in original size
   
v. Complete Overhaul 1 x Unit 1500kW, 3.3 kV, 1484/744 RPM, Dual Speed Motor
Rotor Winding Before Service, Clean & Re-varnish   Rotor Winding After Service, Clean & Re-varnish   Re-assemble the Rotor into Stator Winding
Rotor Winding Before Service, Clean & Re-varnish   Rotor Winding After Service, Clean & Re-varnish   Re-assemble the Rotor into Stator Winding
Free-Load Test Run At GEF Works   Before Service, Clean & Painting   After Service, Clean & Painting
Free-Load Test Run At GEF Works   Before Service, Clean & Painting   After Service, Clean & Painting
vi. Complete Overhaul 1 x Unit 1600 kW, 6.6kV, 750 RPM, Synchronous Motor
Synchronous Motor arrived at our GEF Works   Synchronous Motor arrived at our GEF Works   Before Service, Clean & Painting
Synchronous Motor arrived at our GEF Works   Before Service, Clean & Painting
During Service / Cleaning Process   During Service / Cleaning Process   After Service, Clean & Painting
During Service / Cleaning Process   After Service, Clean & Painting
Oven Cure the stator with temperature control drying oven   Oven Cure the stator with temperature control drying oven   Reassembly the rotor into Stator Winding
Oven Cure the stator with temperature control drying oven   Reassembly the rotor into Stator Winding
To Install the motor back to original position   Rotor winding - Before Service   Ovencure The Rotor winding
To Install the motor back to original position   Rotor winding - Before Service   Ovencure The Rotor winding
Rotor winding After Service   Unloading & Installation the motor at Site   Unloading & Installation the motor at Site
Rotor winding After Service   Unloading & Installation the motor at Site
Reassemble of the rotor into stator winding   Installation & Alignment Of Motor    
Reassemble of the rotor into stator winding   Installation & Alignment Of Motor    
   
<< Page 1 , Page 2  
Copyright © GEF Technologies Sdn Bhd. All Rights Reserved.